Sheth Infrastructure

Perma Recrete is a cementatious grey powder with micro fine aggregates which allows reconcreting of the damaged, dilapilated structures. The product is a boon for present day rehabilitation engineers.The product needs only addition of water to form free flowing concrete with enormous initial and final strengths.

Primary Uses :

Perma Recrete is a very handy tool in the hands of an advanced structural repair engineer to reconstruct parts of beams and columns with far superior strength, fair finished and with very-high speed. Grouting structural cut outs and recess in sanitary fittings like floor traps, annular spaces of pipe passes through walls etc., in residential buildings.

Advantages :

Perma Recrete has very high work ability hence it can be poured in to the shutters with a mug also This workability helps the product to reach all minor crevices and fill effectively

Perma Recrete develops very high early strength. It develops strength of the parent concrete within 24 hours of pouring

Perma Recrete develops a very strong bond with the parent concrete. It is impermeable and protects reinforcements from corrosion

It does not need elaborate curing just sprinkling water for two days is enough

Directions for Use:

Mix Perma Recrete with water in the ratio of 4 litres of water to a 25 kg sack of material to get a uniform free flowing mortar. First add 80 % of recommended water to the powder and mix well. Then slowly add water to get the right consistency (water required for a consistency may vary by 10 to 20 % depending upon various factors).Pour this mortar in the rigidly fixed forms. Care should be taken to see that the contact surfaces are dampened before fixing the form. Shutter forms should be effectively sealed to avoid uncontrolled leakages. If the repaired surface needs replastering then hack the surface immediately after removal of shutters.

Surface Preparation:

Surfaces to be reconcreted with Perma Recrete should be clean, sound, free from any laitance or any deleterious material. Weak portions of the concrete should be cut back to sound surface. Reinforcements should be cleaned to remove rust and supplement additional reinforcements wherever required. Damp down the concrete surface before fixing the shutter forms.

Prema warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.

The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose. PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.

The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users.

Nerolac perma hypercrete waterproofing coatings for multipurpose use at construction site

Nerolac Perma DPS
damp proof course